Round Picnic Table with Perforated Steel Top, Gardens & Schools

Product Overview

A round steel picnic table sized for four, this set pairs a punched steel top with four separate contoured seats arranged around a welded pedestal column. The tabletop is a single perforated steel panel rather than a slatted or open-mesh build, so guests get a smooth, continuous surface to eat from, and the pedestal footprint leaves the floor around the table clear. Four individual chairs sit around it, each with a contoured seat pan and a sloped back — people sit facing each other at the table instead of swinging a leg over a fixed bench.

Cafes, hotels, campuses and park operators buy this kind of set when the furniture has to take daily public use and still look tidy at the start of every season. As a commercial picnic table manufacturer, we build the top, the seats, the column and the frame as one assembly rather than buying parts in from several workshops, which is why the finish, the fixings and the profile match on every unit in an order.

Most sites arrive at this set from one of two places: timber tables that have gone soft, split at the joints or been repainted every spring, or fixed picnic benches that are awkward to eat at because everyone shares one plank. This is dining furniture rather than park seating — guests sit down facing each other, set a bag under the table and leave — and the clear pedestal base keeps sweeping and mopping a normal part of closing instead of a job of its own.

Specifications

Thermoplastic Coating & Steel Build

The thermoplastic coating is the part of this set that decides how long it stays in service. Plastisol is a vinyl-based compound that is heated and fused onto the steel rather than sprayed and baked like a powder coat, so it forms a thicker, more flexible skin that moves with the metal instead of cracking off it. Knocks that would chip a powder-coated finish leave the coating intact, and the sealed surface keeps moisture, salt and cleaning chemicals away from the steel underneath. For a site ordering an all weather outdoor picnic table, that difference is the whole point — the units stay on the terrace instead of going back to a workshop every couple of years.

Underneath, the set is deliberately simple and heavy. The top is a punched steel plate carried on a welded steel column, and every fastener is 304 stainless steel, so rust streaks never run down the finish and the fixings come apart again years later without seizing. The frame below the top and seats is finished in DuPont outdoor powder coat — a different system from the plastisol, chosen because the frame is a welded structure that needs a thin, even film across its joints, while the tabletop and seats need the softer, thicker protection of the thermoplastic layer. As a commercial picnic table manufacturer, we specify those two finishes separately rather than coating a whole set with one product and hoping it suits every part.

Key Features

• Four individual contoured seats — a round steel picnic table set up this way gives every guest their own seat pan and backrest, so four people eat comfortably instead of sharing one bench, and the seats can be spaced to suit the site.
• A top that sheds water instead of holding it — the punched steel plate lets rain run through rather than pooling in a tray, and the surface dries quickly after a storm or a hose-down.
• Built for repeated daily service — this is a heavy duty picnic table in the practical sense: welded steel column, steel plate top and stainless fixings, sized for a terrace that turns tables over all afternoon.
• Umbrella-ready from the start — a central opening takes a standard patio umbrella pole, so a sunny terrace can be shaded without drilling the top or adding a separate base.
• Comfortable in heat and cold — the thermoplastic surface stays cooler than bare metal in direct sun and warmer than steel in cold weather, which matters when guests are deciding whether to sit down.
• Finished for year-round exposure — as an all weather outdoor picnic table, the set is meant to stay outside through sun, rain, snow and humid summers without the finish breaking down.
• A finish that matches the rest of the site — the same coating family runs across our benches, planters, bicycle racks and tree grates, so a table ordered for one terrace can sit beside furniture from an earlier phase without looking like an afterthought.

Installation & Mounting

1. Decide where the round outdoor table will stand. Choose a level paved or decked area with enough clearance behind each seat for a guest to pull a chair out, and keep walkways clear around the pedestal.
2. Choose anchored or free-standing. The base comes with pre-drilled holes: bolt it down to concrete or decking for a permanent installation, or leave it free-standing if the terrace layout changes during the year.
3. Fasten the pedestal. Bolt the base using the 304 stainless hardware supplied with the set, tightening the fixings evenly so the column stands vertical.
4. Assemble the top and seats. The set ships unassembled, with instructions and hardware in the shipment; fit the tabletop onto the column first, then the four seats.
5. Position the four seats. Because the chairs are separate pieces, set them at whatever spacing suits the trade — closer together for a lunch service that turns quickly, further apart for a more relaxed layout.
6. Give the finished set a check. Confirm that the heavy duty picnic table sits flat and level, that every fixing is tight, and that the coating carries no marks before the terrace opens.

Applications

• Cafe and coffee-shop terraces — the round outdoor table footprint suits two couples or a small group, and staff can move between tables without stepping around bench ends.
• Hotel and resort courtyards — the finish reads as furniture rather than park equipment, which matters on a terrace guests see from the lobby, the pool deck or a restaurant window.
• Restaurant and brewery gardens — table tops in a busy garden take spills, sun and constant turnover; the sealed surface wipes down between sittings and does not soak anything up.
• University and corporate campuses — outdoor dining areas and staff break terraces need seating that survives term-time use and a quiet summer without a maintenance visit.
• Park cafes and municipal plazas — where a table is left in place all year and inspected only occasionally, welded steel under a fused coating is easier to defend through budget cycles than a timber replacement programme.
• Food courts and mixed-use plazas — four-seat round tables group naturally in twos and threes, so a seating area can be scaled up or down without changing the furniture specification.

Surface Care & Long-Term Ownership

1. Rinse or wipe the set down as part of your normal cleaning round. A hose or a damp cloth lifts dust, food residue and bird droppings before they have a chance to settle on the surface.
2. Use mild soap and water for anything stubborn. The coating is sealed, so ordinary household cleaners handle most marks without special products.
3. Bring in a power washer only when a rinse is not enough. The surface takes one on stubborn grime; keep the nozzle moving rather than holding it in one spot.
4. Keep acetone-based products and abrasive pads away from the finish. Solvent cleaners and scouring pads work on the coating rather than on the dirt.
5. Check the fixings and the coating edges once a season. Stainless hardware rarely needs attention, but re-tightening a bolt early is cheaper than finding a loose pedestal after a busy summer.
6. There is no re-finishing programme to budget for. Because this is an all weather outdoor picnic table with a fused coating rather than a painted or timber surface, the seasonal cycle of sanding, sealing, staining and repainting is simply not part of owning it.

Ordering & Delivery

Scale & Supply Capability

Arlau is a factory, not a trading house. We have been manufacturing since 1999 — more than 26 years — from a 13,000 m² plant with around 100 staff, automated robotic production and an annual output of 130,000 pieces. We export to over 80 countries and hold quality, environmental and occupational health and safety management system certifications, plus five-star green supply chain certification and dozens of utility model and design patents. OEM and ODM one-stop export service is standard, and our after-sales team supports you after delivery.