Metal Mesh Picnic Table with Backrest, 6ft, Seats 6, Parks & Trails

Product Overview

The Arlau TB64 is a six-foot rectangular picnic table with two attached backrest benches, finished in matte black and built for outdoor sites that are in use every day of the year. Six people sit comfortably along the two benches, and the backrests are what turn a quick stop into a proper lunch break. As a commercial picnic table manufacturer we build the mesh top, the welded frame and the coating in our own plant, so the part that carries the weight and the part that keeps the weather out come from the same production line.

Parks and greenways, school grounds, hospital and clinic courtyards, campgrounds and commercial patios are the settings this model was drawn for. It is the table you install where a timber top would need re-sealing every season and a light folding table would be gone within a month. Every unit leaves our picnic table factory as a matched set — mesh top, two backrest benches, welded frame and stainless hardware — so nothing has to be chased up separately on site.

Backrest Seating & Comfort

• Back support sized for adults. Each bench gives 12 in of seat depth at a 20 in seat height, so people sit in a normal, supported position instead of perched on a plank.
• Seating that breathes. The seats and backrests are perforated rather than solid, so air moves through them and the surface stays noticeably cooler than steel plate or timber after an hour in full sun.
• Easy to get up from. The seat sits close to ordinary chair height, which matters on school grounds and at senior centers where visitors may not want to push themselves up from a low bench.
• Benches welded to the frame, not bolted to it. Seating and table share one rigid structure, so the unit stays steady when a group leans back at the same moment and there is no joint to tighten up later.
• Comfort changes how a heavy duty picnic table gets used. With backrests, people stay for a full lunch hour, a card game or a long wait, instead of leaving as soon as they have eaten.
• Edges that are safe to brush past. On a steel picnic table, the parts people touch are the parts that get noticed. The top and bench edges are beveled and the surfaces are smooth, so there are no cut edges or sharp corners at hip height in a busy public space.

Mesh Top & Steel Frame Build

The tabletop and both benches are thick-gauge perforated metal mesh with the diamond pattern you can see across every surface. The mesh is coated in thermoplastic that is sprayed on as a smooth, slightly glossy skin rather than painted on as a film, so there is no edge of paint to lift where the pattern is cut. The coating is UV-stabilized and non-porous, which is why spilled drinks and food wipe away instead of soaking in, and why rain drains straight through the open pattern instead of pooling on the surface.

Underneath sits a galvanized steel frame with a black zinc-rich powder coat. Galvanizing protects the steel from the inside, the powder coat protects it from the outside, and together they cover the welds — which is where ordinary outdoor furniture usually starts to rust.

Choosing an outdoor picnic table supplier that runs its own coating line matters more than it sounds. Coating thickness is what decides whether a table still looks new in year five or shows bare patches in year two, and we apply it ourselves on a dedicated line rather than sending frames out to a subcontractor. That is also why the finish is even from the first unit to the last in a project order, so a second delivery matches the first.

Load Ratings & Anchor Security

• 900 lbs per bench. Each of the two benches is rated to carry 900 lbs, which means a bench full of adults sitting down together is well inside its working range.
• 1,000 lbs on the tabletop. The top is rated to 1,000 lbs. It is a metal picnic table that people lean on, sit on the edge of and load with catering trays, and the rating is set for that kind of use rather than a tidy dinner for six.
• Welded anchor brackets. The anchor brackets are welded to the frame legs rather than bolted on, so there is no joint to work loose under years of sideways pressure.
• Built to stay where it is put. Fixed down, the table does not walk across a plaza in wind, tip on an exposed site, or disappear overnight from an unlit corner of a park. On sites where theft and movement are a running cost, that is the difference between one purchase and a replacement cycle.
• Figures you can put in a schedule. Both capacities are published for this heavy duty picnic table, so they can go straight into a parks, campus or plaza furniture specification instead of being left as to be advised.
• Rated for constant rather than occasional use. These are commercial figures for a table that is loaded many times a day, which is the reason the same unit is specified for schoolyards and public parks.

Specifications

Installation & Site Setup

1. Agree the fixing method before delivery. The table can stand on a firm level surface or be fixed down permanently. If it is going onto concrete or asphalt, check that the pad is sound and flat ahead of the delivery date, because the anchor brackets are welded to the base of the frame and are drilled straight through.
2. Check the pack on arrival. The table leaves our picnic table factory unassembled to keep freight volume down. The mesh top, two backrest benches, frame sections, stainless hardware and safety caps arrive together as one matched set.
3. Assemble on the ground. Lay the parts out flat and work through the supplied instructions, fitting the stainless hardware as you go. Two people can normally finish the assembly in under 30 minutes.
4. Fit the safety caps. Press the supplied caps over the exposed bolt ends. It takes a minute and removes the last hard points at shin and knee height.
5. Move it into position and level it. This is a heavy duty picnic table, so use two people for the lift, set it on the prepared base and check that all four legs sit flat before anything is drilled.
6. Anchor it down. Drill through the welded anchor brackets into the concrete or asphalt, tighten the fixings and check the table for movement.
7. Ask before you drill into an unusual base. Pavers, decking or a loose trail surface all need a different answer. Send a photo to your sales contact first — as the commercial picnic table manufacturer we can say whether the standard brackets will hold there or whether another fixing is needed.

Where This Table Fits

On a park trail or along a municipal greenway, this table does the job of a bench and a table at once: people stop, sit down with something behind them and stay for twenty minutes instead of five. Park picnic tables with backrests are also the ones that get used in the shoulder seasons, when a backless bench is too cold and too exposed to sit on for long. The perforated top helps here too — after a shower the seats drain and dry far faster than timber slats.

School grounds and campuses are the second natural home. One six-foot unit seats a group without turning into a crowd, and a metal picnic table with an open mesh top stays cool enough to lean on during a lunch break in direct sun. Because the benches are attached, there is nothing to drag around, stack or throw.

Commercially, the table suits patios, pool decks and campgrounds where guests expect outdoor seating that looks deliberate rather than improvised. In hospital and clinic courtyards, or outside a care home, fixed seating, back support and smooth beveled edges make it a safer choice than loose chairs. Photographs of this table on a paved path beside a golf course, on open grass and on a riverside patio show how little it depends on its setting — the matte black finish reads the same on all three.

Custom Colours & Project Options

• Three standard lengths. This backrest model is produced in 4 ft, 6 ft and 8 ft, so a small courtyard and a long plaza edge can be furnished from the same design.
• Black is standard, other colours run on project orders. Green, red and blue finishes are produced for bulk and project work, which is how a city matches new park picnic tables to the colour already used on its benches, bins and bollards.
• Custom dimensions. Length and width can be adapted where a site has a fixed footprint to fill or a narrow gap to fit.
• Backrest height and bench layout. Backrest height and seating arrangement can be adjusted on custom orders, so the seating suits the age group or the reach range the site was planned around.
• Accessible formats. ADA-compliant configurations are available for projects that need them — tell your sales contact which clearance and reach standard the site follows.
• Custom work as a production change. Working with an outdoor picnic table supplier that also manufactures the table means a different colour or a longer top is a change on our own line rather than something bought in and re-badged.

Maintenance & Care

Nothing on this metal picnic table needs painting, sealing or sanding at any point. The routine is a rinse with water at the start of the season and after heavy use; for grease or bird droppings an ordinary household cleaner and a cloth will do, and a pressure washer is fine on the top and seats when a surface has been left dirty for a while. Avoid anything containing acetone — that is the one common solvent that will attack the coating.

A steel picnic table finished this way is meant for year-round outdoor exposure, so frost, rain, salt air and summer heat are normal service conditions rather than something it has to be protected from. In practice, two small habits keep it in good order: clear leaves and debris off the mesh so water drains freely, and check the anchor fixings once a year on a permanent installation so the table stays solid.

Ordering & Delivery

• Order quantity. Orders start at 10 pieces, depending on the product, so this model is normally bought as a project batch rather than a single unit.
• Lead time. Depending on the product, plan on 10 days or more from order to dispatch. Ask your sales contact to confirm the current schedule for your quantity and finish.
• What to send with an enquiry. Quantity, standard or custom finish, length, mounting method, delivery city and any drawing or site plan — the more of that arrives together, the faster a firm quotation comes back.
• Packing and freight. Furniture of this size ships as a project load, so packing method, load planning and delivery terms are agreed with your sales contact before dispatch.
• Drawings and documents. If your project needs a specification sheet or a drawing for approval, ask your sales contact for the current version before you submit.
• Samples. If you want to check the coating and the colour first, ask your sales contact about sample availability.
• You are dealing with the maker. Orders are quoted, produced and shipped by the commercial picnic table manufacturer itself, so technical questions reach the people who build the table.
• Made in our own picnic table factory. Mesh tops, frames and coating all run through our own lines, which is what allows a repeat order two years later to match the first delivery.
• One point of contact. Your sales contact stays with the order from quotation through to dispatch, so a change in quantity or finish is handled by one outdoor picnic table supplier rather than passed between agents.

Seat Temperature & Graffiti Clean-Up

Frequently Asked Questions

1. Does this table require regular maintenance? No — the thermoplastic coating is non-porous and resists stains, UV fading, and corrosion, so an occasional rinse with water is enough to keep it looking good.
2. Can the table be left outdoors all year round? Yes. It is engineered for all-season use, from freezing winters to humid coastal summers, without cracking, rusting, or fading.
3. Is assembly difficult? Assembly is straightforward with the included stainless steel hardware and clear instructions, and two people can typically complete setup in under 30 minutes.
4. Are custom backrest heights or colours available? Yes — Yalau offers OEM and ODM services for bulk orders, including custom dimensions, a choice of green, red, blue or black, and ADA-compliant configurations. Tell us your exact requirements when you enquire and we will confirm what is possible for your project.
5. How does this model differ from standard picnic tables without backrests? The integrated backrest significantly improves comfort for extended sitting, which makes this table a better fit wherever people stay seated for long periods.

Scale & Supply Capability

Arlau is a factory, not a trading house. We have been manufacturing since 1999 — more than 26 years — from a 13,000 m² plant with around 100 staff, automated robotic production and an annual output of 130,000 pieces. We export to over 80 countries and hold quality, environmental and occupational health and safety management system certifications, plus five-star green supply chain certification and dozens of utility model and design patents. OEM and ODM one-stop export service is standard, and our after-sales team supports you after delivery.